Vision 2448 Manuel d'utilisateur télécharger pdf (Page 10)

Page10

Chapter 2

(Figure 2.1) Series 3 full linear T-slot table format. Shown here is the top view of

the Series 3 Vision 1624. The Vision 1212 and the Vision 1224 have a similar design.

1. Table Base Plate

2. Y-Axis Linear Rails

5. Gantry Assembly

6. Carriage Assembly

7. Breakout Box

8. Y-Axis Stepper Motor (underneath)

4. Y-Axis Lead Screw

(under metal cover)

10. Material Guides

11. Engraving Motor

3. T-Slot Table

7. Breakout Box

1. Table Base Plate

2. Y-Axis Linear Rails

10. Material Guides

6. Carriage Assembly

5. Gantry Assembly

4. Y-Axis Lead Screw

(under metal cover)

11. Engraving Motor

9. X-Axis Stepper

Motor

9. X-Axis Stepper

Motor

3. T-Slot Table

8. Y-Axis Stepper Motor

12. Quick-Lock Vise

1. Table Base Plate. This is the large flat plate upon which everything else is mounted. All

mechanical alignments are referenced to this plate, so the space upon which you place the

engraving table must be a reasonably level surface.

2. Y-Axis Linear Rails. Mounted on the table base plate are steel rails with sealed

bearings, which allow the motion of the T-slot table in the Y-axis direction.

(Figure 2.1a) Series 3 T-slot table format. Shown here is front angled view of the

Series 3 Vision 1624.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Pas de commentaire

Vision 2448 Manuel d'utilisateur Page 10