Vision SNAPSHOT Spécifications

1 TC2-CTL3_manual_en TECHCONNECT CONTROL3 OWNERS MANUAL www.visionaudiovisual.com/techconnect/tc2-ctl3

10 TC2-CTL3_manual_en Module learns code but doesn’t control the projector • Re-program the buttons. • If you programmed in simple mode try prog

11 TC2-CTL3_manual_en SPECIFICATIONS PRODUCT DIMENSIONS: 71 x 42 x 31mm (length x width x height) PRODUCT WEIGHT: 63 grams CONSTRUCTION MATERIAL: Plas

12 TC2-CTL3_manual_en time and without notice. Such changes will be incorporated into new editions of the User Manual.

2 TC2-CTL3_manual_en DECLARATION OF CONFORMITY Where applicable Vision products are certified and comply with all known local regulations to a ‘CB Cer

3 TC2-CTL3_manual_en USE ONLY DOMESTIC AC OUTLETS Connecting the unit to an outlet supplying a higher voltage may create a fire hazard. HANDLE THE PO

4 TC2-CTL3_manual_en FRONT AND REAR PANELS 1. Learn Confirmation LED (green) 2. Learn Mode LED (red) 3. IR Receiver 4. Internal IR Blas

5 TC2-CTL3_manual_en CONTROL OPTIONS IR Techconnect Control learns and replicates codes sent from a device’s infrared remote control. An IR emi

6 TC2-CTL3_manual_en INSTALLATION 1. FIT LABELS Use flat-head screwdriver to unclip clear button covers, then apply labels as shown: 2. SELEC

7 TC2-CTL3_manual_en SIMPLE MODE PROGRAMMING Appropriate for controlling one IR device only, e.g. projector. 1. PUT DEVICE INTO LEARN MODE Press

8 TC2-CTL3_manual_en ADVANCED MODE PROGRAMMING NOTE: Device must use mains-power for these advanced functions. Use when you need to • Program

9 TC2-CTL3_manual_en NOTE: When you press ‘learn’ in software wait until the red LED appears on the module, then point original remote at front of mo