Vision X4D Spécifications télécharger pdf (Page 12)

2322

Chapter 7 Charging & uSing the Battery

Chapter 8 tipS For uSing the uSB Bridge

Figure1

Figure2

Figure3

Charging the battery:

1) Insert the lithium battery into

the charger base of the USB

Bridge so that it can fully

charge. Do not use extreme

force when inserting the bat-

tery, as it will only t securely

in one direction (SeeFigure

1).

2) Connect the tip of the

included power supply to the

“DC 12V” input port on the

rear of the USB Bridge

(SeeFigure2).

3) Plug in the remaining end

of the power supply to an

available AC/mains outlet.

(SeeFigure3).

4) Press the POWER button

on the front of the USB

Bridge. When the battery is

charging, the red “CHARGE”

indicator illuminate.

(SeeFigure4).

5) When the “CHARGE” indicator begins to blink,

the battery has fully charged. Resume normal

USB Bridge operation as described on page 14.

Figure 4

General Tips

• Use caution when attaching the output of your

Enhanced Vision product to the CAMERA input

of the USB Bridge. The specially designed

connector will only t in one direction. Once

attached, it should not be removed under normal

circumstances.

• Do not disconnect the USB cable from your PC or

the USB Bridge while the software application is

running. This may cause your system to become

unstable. Always exit the software application

before disconnecting the USB cable.

Using Acrobat NTSC/PAL

with the USB Bridge

• The Acrobat (long or

short arm version) is

compatible with the USB

Bridge.

• Using a new, fully charged lithium battery, the USB

Bridge will supply portable power to your Acrobat

NTSC/PAL for approximately 2 hours*

• Be sure to use the Acrobat with sufcient ambient

lighting. Because this device projects a magnied,

camera-based image, adequate lighting will

ensure that the best picture quality is obtained.

*Estimatedtimesonly.Actualusagetimeswillvary

based on the life cycle remaining on the battery.

TIPS FOR USING THE USB BRIDGE

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Commentaires sur ces manuels

Pas de commentaire

Vision X4D Spécifications Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Enregistreurs vidéo numériques (DVR) Vision X4D