Vision VHD-800 Manuel d'utilisateur télécharger pdf (Page 30)

1.5.15. Quick Setup – QUICK SETUP

Quick Setup is to help user make easy configuration for recording resolution, recording speed, recording mode,

recording quality and recording periods based on the capacity of HDD installed.

The setting made by QUICK SETUP will get the first priority to apply on the system whatever user sets

configurations in other menu.

USE QUICK SETUP

A. RECORD

i. Check [USE QUICKSETUP] option to use quick recording setup.

ii. Select “RECORDING RESOLUION/RECORDING FPS/RECORDING QUALITY/RECORDING

MODE”.

iii. Click [SAVE] button to save.

B. DUAL STREAM

i. Check [USE DUAL STEAM] to use dual stream quick setup.

ii. Select “NETWORK RESOLUION/NETWORK FPS/NETWORK QUALITY/NETWORK AUDIO

iii. NETWORK LIMIT : please refer Chapter “1.5.10”(Dual Steam).

iv. Dual Stream is for only live monitoring.

Note

If the camera is set as “OFF” in the camera setting menu, it will not be recorded even if it is set in

the Quick Setup menu. Please check if any of cameras is not recorded.

Note

The network stream resolution should be set equal to or smaller than recording resolution.

1 2 ... 25 26 27 28 29 30 31

Pas de commentaire

Vision VHD-800 Manuel d'utilisateur Page 30