Vision VPD370WD Manuel d'utilisateur télécharger pdf (Page 14)

2. Rotate the camera base unit in the direction indicated by the arrow and remove it.

Step 2

3. To install the camera mounting base to ceiling, attach a template and drill the holes.

If you are using the top cable exit configuration, drill the top cable exit part to a template.

Note

When you use the camera mount base without a template, you can mark the location of four mounting holes & drill the

holes.

After loosening the screw,

press upwards on the camera and

then remove it

Rotate

Pull the camera

Mounting base

Up to remove it

Mark here

Rotate

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 42 43

Pas de commentaire

Vision VPD370WD Manuel d'utilisateur Page 14