Vision VISION-64 Guide de l'utilisateur télécharger pdf (Page 17)

Vision-64 User Guide

Issue 1.02

Inputs > Commands >

Smoke Sensor Reset

MENU 3-0-5

This menu allows you to reset smoke sensors.

1. Enter [MENU] + [3] + [0] + [5].

A list of different areas will display on the keypad.

2. Use the [

↑] and [↓] keys to select the area that you want

to reset the smoke detectors, then press [OK] to select.

Alternatively, you can enter the area number, then press

[OK].

The keypad will display the following:

Smoke detector reset in

Progress. Please wait

3. The keypad will automatically return to the menu when all

smoke detectors in the area has been reset.

Inputs > Zone Properties >

Zone Name

MENU 3-1-0

This menu allows you to program up to 16 characters for the name

of each zone.

1. Enter [MENU] + [3] + [1] + [0].

A list of different zones will display on the keypad.

2. Use the [

↑] and [↓] keys to select the zone name that you

want to change, then press [OK] to select. Alternatively, you

can enter the zone number, then press [OK].

The keypad will display the following:

Zone Name Z001

Zone 1 Name

Press ◄► OK to SAVE

3. Use the [←] and [→] keys to scroll the cursor left and right

across the zone name text. Use the [

↑] and [↓] keys to scroll

through the different characters available. To clear all text

from the cursor position to the right, press the [OFF] key.

4. Press [OK] to save and exit, or press [MENU] to exit without

saving.

Inputs > Input Testing >

Walk Test All Zones

MENU 3-9-0

This menu allows you to test all zones within an area at the same

time. To successfully walk test each zone, you must open and close

each zone.

1. Press [MENU] + [3] + [9] + [0].

The keypad will display a list of areas that are available to

walk test zones.

2. Use the [

↑] and [↓] keys to select the area that you want to

do walk test, then press [OK] to select. Alternatively, you

can enter the area number, then press [OK].

The keypad will scroll all zones that you can test.

To test Z001 open/close

Zone 1

Press OK or MENU

To test Z002 open/close

Zone 2

Press OK or MENU

3. Open and close each zone that needs to be tested. A zone

that has been successfully tested will no longer scroll on the

keypad display.

When all zones have been tested, the keypad will display:

Selected zones have been

Tested OK

Press OK or MENU

4. Press [OK] to save and exit, or press [MENU] to exit without

saving.

Inputs > Input Testing >

Walk Test A Single Zone

MENU 3-9-1

This menu allows you to select a single zone to be tested via walk

test.

1. Press [MENU] + [3] + [9] + [1].

The keypad will display a list of zones that are available to be

tested via walk test.

2. Use the [↑] and [↓] keys to select the zone that you want to

walk test, then press [OK] to select. Alternatively, you can

enter the zone number, then press [OK].

The keypad will display the zone to be tested.

To test Z001 open/close

Zone 1 Name

Press OK or MENU

3. Open and close the zone that needs to be tested.

When the zone has been successfully faulted and restored,

the keypad will display:

Z001 Zone 1 Name

Test Successful

Press OK or MENU

4. Press [OK] to save and exit, or press [MENU] to exit without

saving.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Vision VISION-64 Guide de l'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Vision VISION-64