Vision VISION-64 Guide de l'utilisateur télécharger pdf (Page 18)

Vision-64 User Guide

Issue 1.02

OUTPUTS

Each Vision-64 Vision control panel has up to a maximum of 8

outputs. 4 outputs are available as standard with an additional 4

available when the optional output expander is fitted. Your installer

will advise you on the exact makeup and configuration of you

system.

Outputs > Commands >

Output Status

MENU 4-0-0

This menu allows you to view the status of each output.

1. Ensure that the system is turned off.

2. Press [MENU] + [4] + [0] + [0].

The keypad will display a list of outputs that the status may

be viewed.

3. Using the [

↑] and [↓] keys, highlight the output that you want

to view the status information, then press [OK] to select.

Alternatively, you can enter the output number and then

press [OK].

The keypad will display the following when the output is off

and OK:

Output 1 Name O001

Is Off and Ready

Press OK or MENU

The keypad will display the following when the output is off

and missing:

Output 1 Name O001

Is Off and Ready

Connection Trouble

Press OK or MENU

The keypad will display the following when the output is ON

and OK:

Output 1 Name O001

Is ON and Ready

Press OK or MENU

The keypad will display the following when the output is ON

and missing:

Output 1 Name O001

Is ON and Ready

Connection Trouble

Press OK or MENU

4. Press [OK] to save and exit, or press [MENU] to exit without

saving.

Outputs > Commands >

Turn Output On/Off

MENU 4-0-1

This menu allows you to turn outputs that have been programmed

by your security company on or off. These outputs can be

programmed to control outside lighting, pool pumps, watering

systems etc.

1. Press [MENU] + [4] + [0] + [1].

If a valid PIN is required, the keypad will prompt you to

enter your PIN.

2. Use the [

↑] and [↓] keys to select the output name that you

want to change, then press [OK] to select. Alternatively, you

can enter the output number, then press [OK].

3. To toggle the output on or off, use the [ON] and [OFF] keys.

The keypad will display the following when the output is off:

Output 1 Name O001

Output is OFF,

To Turn ON,Press ON.

To Go Back Press OK

To turn the output on, press [ON].

The keypad will display the following when the output is on:

Output 1 O001

Output is ON,

To Turn OFF,Press OFF.

To Go Back Press OK

To turn the output off, press [OFF].

4. Press [OK] to save and exit, or press [MENU] to exit without

saving.

Outputs > Properties >

Output Name

MENU 4-1-0

This menu allows you to program the name for each output. Each

output name supports up to 16 characters.

1. Enter [MENU] + [4] + [1] + [0].

A list of different outputs will display on the keypad.

2. Use the [

↑] and [↓] keys to select the output name that you

want to change, then press [OK] to select. Alternatively, you

can enter the output number, then press [OK].

The keypad will display the following:

Output Name O001

Output 1

Press ◄► OK to SAVE

3. Use the [←] and [→] keys to scroll the cursor left and right

across the output name text. Use the [

↑] and [↓] keys to

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Vision VISION-64 Guide de l'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Vision VISION-64