Vision VISION-64 Guide de l'utilisateur télécharger pdf (Page 9)

Vision-64 User Guide

Issue 1.02

Sy ste m P rog ramm ing

Access > PIN Codes >

Change Own PIN

MENU 1-1-0

This menu lets you change your own PIN. It is recommended that

you write down your old PIN and the new one before you begin.

The new PIN must have the same number of digits as your old

PIN. Once the change is complete you should destroy the written

copy.

At factory default, each PIN is fixed to 4 digits in length. The default

PIN for User 1 (Master user) is 2580. Only the security installer

can change the PIN length.

1. Ensure that the system (or area) is turned off.

2. Enter your PIN, and then press [MENU] + [1] + [1] + [0].

The keypad will prompt you to enter a new PIN.

Enter New PIN for

DEBBIE SMITH U002

Press OK or MENU

3. Enter your new PIN, and then press [OK]. If an error tone

sounds, try a different PIN. The keypad will now prompt you

to enter your new PIN again.

Conﬁrm New PIN for

DEBBIE SMITH U002

Press OK or MENU

4. Enter your new PIN again.

5. Press [OK] to save and exit, or press [MENU] to exit without

saving Your PIN has now been changed.

PROGRAMMING TEXT USING THE KEYPAD

When programming text via the keypad, various keys on the keypad

operate differently.

A group of characters is assigned to each of the numeric keys on

the keypad. Pressing the same numeric key again will toggle to

the next character assigned to the key (eg. Press the [2] key will

display the ‘A’ character, press the [2] key again will toggle to the

‘B’ character, press the [2] key again will toggle to the ‘C’ character

etc).

Once the correct character is display use the arrow keys to move

to the next letter of the word you are entering.

The key assignments are identical to those found on most fixed and

mobile phones.

When programming text, each numeric key represents a different

group of characters.

Pressing the same numeric key repeatedly will step you through

the available characters assigned to the key. The text key layout

is the same as most phones. Refer to the table below for detailed

character information.

Refer to the table below for more information.

Key Characters Assigned To Each Numeric Key

. , ? ! - & < > 1

A B C a b c 2

D E F d e f 3

G H I g h i 4

J K L j k l 5

M N O m n o 6

P Q R S p q r s 7

T U V t u v 8

W X Y Z w x y z 9

SPACE



@ # $ % * 0



Scroll Up through entire character list



Scroll Down through entire character list



Move to left one character position



Move to right one character position

OFF

Clear from cursor postiion to end of line

Table 4: Text Keypad Character Set

Once the desired character is displayed press the right [] arrow

key to move to the next character position.To save programming

changes, press [OK], or press [MENU] to exit without saving.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Vision VISION-64 Guide de l'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Vision VISION-64