Vision VISION-64 Guide de l'utilisateur Page 6
- Page / 32
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
6
Vision-64 User Guide
Issue 1.02
Copyright
© 2002-2004 Digflex Pty Ltd
Re port ing Al arm s
Your system may be programmed to send reports to your security
company. Once the report is complete, the system returns
the telephone to normal operation (check with your security
company).
Your system makes repeated attempts to send reports to your
security company. If your system fails to report, the keypad will
display the ‘service’ symbol.
Ab out th e Ke ypad
Your keypad has 20 keys or buttons. The buttons allow you to
input instructions and navigate the menu screens as required. Some
buttons have a secondary function which is activated by holding
them down for two seconds.
Each button’s function is described below:
KEYPAD KEYS
Key
Description
to
The numeric keys allow you to enter you
numbers when required
Use the [MENU] and the numeric keys to
enter commands. The [MENU] key is also
used to go back one level when navigating
through menus or to exit a programming
location without saving changes.
The [ON] key allows you to turn an area or
output on. To turn all areas on at the same
time when the system has been partitioned,
press and hold the [ON] key for two
seconds.
The [PART] key allows you to turn an area
Part On. This key can also be used to bypass
a zone or multiple zones when you press
and hold for two seconds.
The [OFF] key allows you to turn an area or
output off. To turn all areas off at the same
time when the system had been partitioned,
press and hold the [OFF] key for two
seconds.
The [OK] key allows you to save any changes
and exit the command.
The [MAIL] key allows you to read stored
mail. This key can also be used to initiate a
dialler test when you press and hold for two
seconds.
The [] key allows you to move the cursor
left when programming text or telephone
numbers.
The [] key allows you to move the cursor
left when programming text or telephone
numbers.
The [↑] key allows you to navigate through
menus or to toggle characters when
programming telephone numbers.
Key
Description
The [] key allows you to navigate through
menus or to toggle characters when
programming telephone numbers. Pressing
The [] key will display current trouble
conditions when the area that the keypad is
displaying is disarmed.
+
Pressing the 1 and 3 keys together and
holding them down for 2 seconds will cause
a Panic alarm to be triggered. If programmed
the sirens will sound and the monitoring
station will be notified.
+
Pressing the 4 and 6 keys together and
holding them down for 2 seconds will cause
a Fire alarm to be triggered. If programmed
the sirens will sound and the monitoring
station will be notified.
+
Pressing the 7 and 9 keys together and
holding them down for 2 seconds will
cause a Medical alarm to be triggered. If
programmed the sirens will sound and the
monitoring station will be notified.
Table 2: Keypad Keys and Their Function
STATUS ICONS / LED’S
The following table describes the function of each of the status
icons.
Icon Status Meaning
The keypad can display which areas (1 – 8) are turned on
or off via the Area Icon Indicators. This programmable
option can be disabled in MENU
On
The area is turned All On or Part On
Off
The area is turned Off
Flashing
Fast
The area has an alarm
On
System power is normal
Flashing
System power is missing
Flashing
A fire alarm is active
Off
No fire alarm
On
Fire alarm in memory
(Turn the area All On and Off to Clear).
On
The existing service or trouble condition
has been acknowledged.
Off
No service or trouble conditions exist
Flashing
A service or trouble condition is present
that has not been acknowledged.
On
The area is turned Part On.
Off
The area is not turned Part On.
- VISION-64 1
- Conte nts 3
- Pr ogra m M enu Tr ee 4
- In tro duc tio n 5
- Featu res 5
- Us er’ s G uid e 5
- Re port ing Al arm s 6
- Ab out th e Ke ypad 6
- Icon Status Meaning 7
- Ba sic Sy ste m O perat ion 8
- Sy ste m P rog ramm ing 9
- Change Other PIN 10
- Delete PIN 10
- Add Token 11
- Delete Token 11
- Token Status 11
- Add Keyfob 11
- Area Assignment 12
- User Options 12
- Delete Keyfob 12
- User Name 12
- Timer Group 13
- Access Assignment 13
- Area Status 13
- Fri,Aug,13 5:34 pm 14
- Area Name 15
- Zone Status 15
- Bypass Zones 15
- Set Chime Zones 16
- Set Part 2 Zones 16
- Smoke Sensor Reset 17
- Zone Name 17
- Walk Test All Zones 17
- Walk Test A Single Zone 17
- Output Status 18
- Turn Output On/Off 18
- Output Name 18
- External Siren Test 19
- Internal Siren Test 19
- Strobe Test 19
- Call/Answer RAS 20
- Call Forward On/Off 20
- Check Web Email 20
- Email System Log 20
- Set Domestic Phone Number 20
- Call Forward On Number 21
- Call Forward Off Number 21
- Customer 21
- Send Test Report 21
- Issue 1.02 22
- Copyright 22
- © 2002-2004 Digflex Pty Ltd 22
- History Log 24
- Set Date & Time 24
- Trouble Condition Description 25
- Battery Test 28
- Voltage = 13.4V 28
- In stall atio n D etail s 29
- Vision-64 User Guide 30
- Made in 32
- Australia 32
Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Vision VISION-64
(48 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.797 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels