Vision VISION-64 Guide de l'utilisateur télécharger pdf (Page 100)

100 Vision Software User's Guide

Corner Radius: This is the radius amount of the corner of the border. The

larger the number is, the ”more round“ the corner will be.

Border Type: This is the type of border that you would like to use. There

are eight different borders to choose from. The space bar will toggle

through the different types of borders.

Extra Depth: This will add a depth for the border. It is used if you want to

use the border feature to cut out your plates in a multiple plate instead of

engraving a border. Enter the depth you would like to engrave. This will

usually be the thickness of the material you would like to cut out.

Number of Cuts: This will make multiple passes of the border to give it a

different look. It works with the item below.

Distance Between: This is the distance between the multiple cuts as

described above.

Clear: This will clear the settings for the border you are on.

Delete: This will delete the border you are currently working on.

Note: If you set the margins to 0, it is best to select the ”Ignore Clips“

option from the Execute Layout screen. If you do not do this, the border

may not engrave completely.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 186 187

Pas de commentaire

Vision VISION-64 Guide de l'utilisateur Page 100