Vision VISION-64 Guide de l'utilisateur télécharger pdf (Page 92)

92 Vision Software User's Guide

Baseline: This is the distance from the top of the plate to the bottom of the

letter.

Line Ht: This is the height of the letter or logo.

Left: This is the margin of the line from the left side of the plate.

Right: This is the margin of the line from the right side of the plate.

Depth: This is the depth of engraving for the line. This option will only

work properly if you are engraving without a nose cone. If you are using a

nose cone, the depth should be left at 0.000 since the engraving depth is

controlled by the nose cone.

If you enter a depth on this screen, the text will have a blue color on the

Graphical Display.

Note: The ”Hot Key“ for this feature is F4.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 186 187

Pas de commentaire

Vision VISION-64 Guide de l'utilisateur Page 92